Vivint SkyControl - System Customization and Tools; Adjusting Chimes; Adjusting Volume and Brightness

28 System Customization and Tools
System Customization and Tools
YoucancustomizetheappearanceandbehavioroftheVivintSkyControlPanelbymodifyingpanel
settings.
Adjusting Chimes
Ondoorsandwindowsmonitoredbysensors,thesystemcanbeconfiguredtosoundachimeto
announcethatthedoororwindowhasbeenopened.Sensorscanalsobeconfiguredtohavethe
panelsaythenameoftheopeneddoororwindowoutloud(e.g.,"Frontdoor").
NOTE:Thechimeandvoiceannouncementsonlysoundwhilethesystemisdis-
armed.
Atthetimeofinstallation,theTechnicianconfigureseachsensor’schime(toneandvoice)option.
AnAdministratorUsercanchangethechimeoptionsforeachsensortofurthercustomizethesys-
temasdesired.
NOTE:Asaglobalsystemoption,thechimeandvoiceforallthesystem’ssensorscan
beturnedonoroffusingtheTone and Voice ChimeoptiononthePanel Settings
screen(Home > Settings > Panel Settings).
To configure the chime options individually for each sensor
1. AttheHomescreen,pressSecurity.
2. AttheSecurityscreen,pressSettings,andthenpressChime and Voice.TheChime
andVoicescreendisplayseachoftheinstalledsensorsthatcanchimeandtheoptioncur-
rentlysetforthesensor.
3. Pressthenameofthesensoryouwanttoconfigure.
4. Selectthechimeoptionthatyouwantforthesensor(seethelistofchimeoptionsbelow).
5. Checktheoptionthatyouwantforthesensor.Youwillheareachoptionwhenyouselectit.
Whenyoufindthechimeyouwant,pressOK.
6. Whenyouarefinished,pressBack.
Adjusting Volume and Brightness
Youcanadjustthebrightnessofthepaneltouchscreendisplayandthevolumeofthespeaker.