Vivint SkyControl - Users; Managing Users

20 Users
Users
Managing Users
TheVivintFieldServiceProfessionalwhoinstalledyoursystemcreatedanAdministratorUser.The
AdministratorUserIDcanbeusedtocontrolthesystem,aswellasassignandchangetheother
usersandtheiraccessoptions.TheAdministratorUsercanalsoaccessseveralsystemsettingsin
theToolbox.Non-Administratorusersarerestrictedfromaccessingsystemsettings.
Viewing User Accounts
NOTE:OnlyauserwiththeAdministratorpermissioncanaddorchangetheother
userIDsandsettings.
To view user accounts
1. AttheHomescreen,pressSettings.
2. EnteryourPIN.(ThedefaultPINis:1111)
3. PressUsers.
Adding Users
Youcancreateupto48uniqueuserIDcodes.
To add a User
1. AttheHomescreen,pressSettings.
2. EnteravalidAdministratorUserPIN.
3. PressUsers.
4. PressAdd user.
5. Enterauniqueusername,andthenpressDone.
6. Enterauniquefour-digitPINforthenewuser.Thisistheuser'spanelaccesscode.
7. Enterthesamefour-digitPINagaintoconfirmthecode.
8. ChoosewhetherornotyouwantthenewusertobeanAdministratorUser.