Pairing Your Speaker with a Bluetooth Device
Your speaker can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches,
and most smartphones, laptops and tablets. In order to pair your speaker with a phone, follow the
steps below:
1. Slide the On/Off Switch to the ON position in order to turn on your speaker. The LED Indicator
Light will start alternately flashing red and then blue repeatedly. This indicates that your earbuds
are in pairing mode.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select “Vivitar BT clock” to start connecting.
4. Enter “0000” if your device asks for the PIN code.
5. Once paired, the LED Indicator Light will stop blinking and steadily shine blue. Note that
anytime music is playing, the light will slowly blink blue every few seconds.
To Next Page
Loading...
