Vivitar DVR 794HDv4 User Manual

10
TO POWER OFF THE CAMCORDER:
1. Press and hold the Power button for about 2 seconds.
2. A sound can be heard from the camcorder’s speaker and the camcorder powers off.
ENERGY SAVE AND AUTO POWER OFF:
ENERGY SAVE: The camera automatically enters Sleep Mode (Energy Save) after one minute of
inactivity to save energy. Once the camera is in Sleep Mode, the Charging/Busy LED Indicator
light (red light, front side of camera) remains on. Short press any camera button to reactivate the
camera.
AUTO POWER OFF: Your camcorder also has an auto power off feature that will automatically
turn off your camcorder after a specific period of time that your camera is left idle. The auto power
off time settings can be set from the ‘Power Save’ settings menu.
NOTE: Shutdown due to low power. When the camera’s power is extremely low, the LCD will
display the Low Battery Power icon . The camera will automatically power off. Please
recharge the battery.
USING THE CAMCORDER
Press the MODE button to
select the mode.
Press the Shutter/OK button to capture
your videos and photos.

Vivitar DVR 794HDv4 Specifications

General

Image Sensor	CMOS Sensor
Video Resolution	1080P@30fps, 720P@60fps, 720P@30fps
Photo Resolution	14M (4416x3312), 12MP(4000x3000), 10MP(3648x2736), 8MP(3264x2448), 5MP(2592x1944), 3MP (2048x1536)
Lens	Fixed Wide Angle 120°
White Balance	Auto, Daylight, Cloudy, Fluorescent, Incandescent
Photo Burst (Continuous Shot)	Off (single photo), 3, 5, 10 continuous photos
Self-Timer	Off, 2 seconds, 10 seconds Double
File Format	H.264 MOV (Video), JPG (Photo)
Language	English, French, Dutch, Spanish, Italian, Portuguese, German, Russian
System Requirements for Vivitar Experience	WINDOWS XP (SP3), Vista (SP1), WINDOWS 7 or higher; MAC OSX v10.5.x or higher
External Memory	Class 6 Micro SD Memory card or higher, up to 32GB
LCD Display	Mono LCD
Frequency	50Hz, 60Hz
Auto Power Off (Power Save)	Off, 1 minute, 3 minutes, 5 minutes
Interface	USB 2.0
Battery	1100mAH removable lithium battery