Vivitar DVR 794HDv4 User Manual

13
Camcorder Mounts and Accessories
WATERPROOF CASE
1. Shutter Release
2. Clamp (Securing Latch)
3. Power/Mode Button
4. Menu Button
5. Wi-Fi Button
Your action cam comes with a waterproof casing for underwater action and added durability. To
assemble your camera to the case, follow the instructions below:
1. Open the latch on the waterproof casing. To open the case, insert a finger at the half circle
of the latch by prying the latch up - away from the case.
2. Insert the camera lens forward into the case.
3. Before sealing the waterproof case, make sure the camera housing’s rubber seal is clean.
Carefully check whether the waterproof ring of the casing is flat and smooth. Close the
door and secure the latch.
4. After putting the device in and closing the cover of the waterproof casing, carefully check
4
3
1
2
5

Vivitar DVR 794HDv4 Specifications

General

Image Sensor	CMOS Sensor
Video Resolution	1080P@30fps, 720P@60fps, 720P@30fps
Photo Resolution	14M (4416x3312), 12MP(4000x3000), 10MP(3648x2736), 8MP(3264x2448), 5MP(2592x1944), 3MP (2048x1536)
Lens	Fixed Wide Angle 120°
White Balance	Auto, Daylight, Cloudy, Fluorescent, Incandescent
Photo Burst (Continuous Shot)	Off (single photo), 3, 5, 10 continuous photos
Self-Timer	Off, 2 seconds, 10 seconds Double
File Format	H.264 MOV (Video), JPG (Photo)
Language	English, French, Dutch, Spanish, Italian, Portuguese, German, Russian
System Requirements for Vivitar Experience	WINDOWS XP (SP3), Vista (SP1), WINDOWS 7 or higher; MAC OSX v10.5.x or higher
External Memory	Class 6 Micro SD Memory card or higher, up to 32GB
LCD Display	Mono LCD
Frequency	50Hz, 60Hz
Auto Power Off (Power Save)	Off, 1 minute, 3 minutes, 5 minutes
Interface	USB 2.0
Battery	1100mAH removable lithium battery