Vivitar DVR 794HDv4 User Manual

6
Initial Camcorder Setup
INSTALLING AND CHARGING THE BATTERY
TO INSTALL THE LITHIUM BATTERY:
1. If the camera is inside the waterproof casing, please take it out of the casing.
2. Push and hold the battery cover lever up to the unlock/open position, until it flips open.
3. Insert the battery into the battery compartment as shown. Make sure to place the battery
according to the correct polarity as shown inside the battery compartment.
4. Close the battery cover.

Vivitar DVR 794HDv4 Specifications

General

Image Sensor	CMOS Sensor
Video Resolution	1080P@30fps, 720P@60fps, 720P@30fps
Photo Resolution	14M (4416x3312), 12MP(4000x3000), 10MP(3648x2736), 8MP(3264x2448), 5MP(2592x1944), 3MP (2048x1536)
Lens	Fixed Wide Angle 120°
White Balance	Auto, Daylight, Cloudy, Fluorescent, Incandescent
Photo Burst (Continuous Shot)	Off (single photo), 3, 5, 10 continuous photos
Self-Timer	Off, 2 seconds, 10 seconds Double
File Format	H.264 MOV (Video), JPG (Photo)
Language	English, French, Dutch, Spanish, Italian, Portuguese, German, Russian
System Requirements for Vivitar Experience	WINDOWS XP (SP3), Vista (SP1), WINDOWS 7 or higher; MAC OSX v10.5.x or higher
External Memory	Class 6 Micro SD Memory card or higher, up to 32GB
LCD Display	Mono LCD
Frequency	50Hz, 60Hz
Auto Power Off (Power Save)	Off, 1 minute, 3 minutes, 5 minutes
Interface	USB 2.0
Battery	1100mAH removable lithium battery