TO CHARGE THE LITHIUM BATTERY:
1. Power off the camcorder.
2. Open the USB cover. Connect the included USB cable to the camcorder and connect the
other end of the cable to a power source such as the included AC charger or to a
computer. Please refer to the images shown below for reference.
CHARGING USING THE AC CHARGER:
CHARGING USING THE COMPUTER:
3. During the time the camcorder is charging, the LED charging status indicator light (blue) is
on. It takes about 3 to 4 hours to fully charge the battery. When the battery is fully charged
the LED status indicator light turns off.
To Next Page
