DLP Projector—User’s Manual
— 16—
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons to navigate and make changes to the OSD.
2
1
1
3
4
5
6
1. To enter the OSD, press
the MENU button.
2. There are three menus.
Press the cursor ◄►
button to move through the
menus.
3. Press the cursor ▲▼
button to move up and
down in a menu.
4. Press ◄► to change
values for settings.
5. Press MENU to close the
OSD or leave a submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the
Horizontal/Vertical Position items in the Computer menu can only be modified when
connected to a PC. Items that are not available cannot be accessed and are grayed out.
To Next Page
Loading...
Need help?
General
