Vivitek D7 Series User Manual (English)

Questions and Answers:

S
Steve CantrellAug 13, 2025
What to do if there is no light from my Vivitek D7 Projector?
- E
  Erin WilliamsAug 13, 2025
  If your Vivitek Projector has no light, check the power cable to ensure it's securely connected. Verify the power source by testing it with another electrical device. Restart the projector and ensure the Power LED is green. If you recently replaced the lamp, try resetting the lamp connections. If the issue persists, consider replacing the lamp module or putting the old lamp back in and having the projector serviced.
R
Robert SmithAug 17, 2025
How to flip the image on a Vivitek Projector?
- Z
  Zachary RayAug 17, 2025
  To flip the image on your Vivitek Projector, check the Projection setting on the Installation I menu of the OSD.
J
Joseph VaughanAug 21, 2025
What to do if my Vivitek Projector remote control is not working?
- B
  brownhollyAug 21, 2025
  If your Vivitek Projector isn't responding to the remote control, try these steps: make sure you are pointing the remote control directly at the remote sensor on the projector and that nothing is blocking the path between the remote and the sensor. Also, try turning off any fluorescent lights or other Infrared-enabled devices in the room that might be interfering. Check the battery polarity and replace the batteries. If none of these steps work, have the remote control serviced.
M
Matthew SnyderAug 25, 2025
How to troubleshoot no sound on a Vivitek D7?
- G
  gonzalezmarkAug 25, 2025
  If there is no sound from your Vivitek Projector, first adjust the volume on the remote control and the audio source. Then, check the audio cable connection and test the source audio output with other speakers. If the problem persists, have the projector serviced.
J
Jeffrey WintersAug 28, 2025
How to fix a blurred image on a Vivitek Projector?
- A
  Angela WilliamsAug 28, 2025
  If the image on your Vivitek Projector is blurred, adjust the focus on the projector. You can also press the Auto button on the remote control or projector. Ensure the projector-to-screen distance is within the specified 10-meter (33-feet) range and check that the projector lens is clean.
J
jasonlucasSep 1, 2025
How to correct a trapezoid image on a Vivitek D7?
- M
  Mark PriceSep 1, 2025
  To correct a trapezoid image (wider at the top or bottom) on your Vivitek Projector, position the projector so it is as perpendicular to the screen as possible. You can also use the Keystone button on the remote control or projector to correct the problem.
A
Alexis SheltonSep 4, 2025
How do I fix a streaked image on my Vivitek D7 Projector?
- S
  Stephanie WhiteSep 4, 2025
  If the image on your Vivitek Projector is streaked, set the Frequency and Tracking settings on the Computer menu of the OSD to the default settings. To ensure the problem is not caused by a connected PC’s video card, connect to another computer.
T
trevinowhitneySep 8, 2025
How to adjust contrast on a Vivitek D7?
- M
  Megan WaltonSep 8, 2025
  If the image on your Vivitek Projector is flat with no contrast, adjust the Contrast setting on the Image menu of the OSD.

Vivitek D7 Series Specifications

General

Display Technology	DLP
Contrast Ratio	15, 000:1
Lamp Life (Eco)	10, 000 Hours
3D Ready	Yes
I/O Ports	HDMI, VGA, RS-232
Inputs	HDMI, VGA, USB
Outputs	Audio-Out
Keystone Correction	±40° Vertical