Vivitek D8 Series User Manual

DLP Projector – User’s Manual
Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See
Navigating the
OSD
on page 18 and on page 19 for help on using OSD menus.) Setting the OSD Language
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
1.
Press the MENU button to open the OSD
menu.
2.
Press the cursor ◄► button to move to
the Installation I menu, press the cursor
▲▼ button to select Advanced.
3.
Press the cursor ▲▼ button to select
Security Lock.
4.
Press the cursor ◄► button to enable or
disable security lock function.
A password dialog box automatically
appears.
– 13 –

Vivitek D8 Series Specifications

General

Brand	Vivitek
Model	D8 Series
Category	Projector
Language	English