Please do not forget to click the “Save” button, when you are
completing the configuration. You can also edit or delete the action,
using the “edit” or “delete” buttons.
l
Configure VIVOTEK Wiegand converter settings in
ANPR service
Click “Wiegand Vivotek” on the action type column to show the
“Action properties,” and configure the converter information to ANPR
service so that ANPR service is able to find the VIVOTEK Wiegand
Converter and know the output format and output bit length it should
use to send to the converter.
To Next Page
Loading...
Need help?
General
