VIVOTEK
30 - User's Manual
Using VIVOTEK Recording Software
The product software CD also contains a VAST recording software with 32 free channels,
allowing simultaneous monitoring and video recording for multiple Network Cameras. Please
install the recording software; then launch the program to add the Network Camera to the Channel
list. For detailed information about how to use the recording software, please refer to the user’s
manual of the software or download it from http://www.vivotek.com.
1. If you forget the root (administrator) password for the camera, you can restore the camera
defaults by pressing the reset button for longer than 5 seconds.
2. If DHCP is enabled in your network, and the camera cannot be accessed, run the IW2 utility
to search the network. If the camera has been congured with a xed IP that does not comply
with your local network, you may see its default IP 169.254.x.x. If you still cannot find the
camera, you can restore the camera to its factory defaults. The factory default is DHCP client.
3. If you change your network parameters, e.g., added a camera via a connection to a LAN
card, re-start the IW2 utility.
Tips:
To Next Page
Loading...
Need help?
General
