Vivotek FD9367-HTV User Manual

VIVOTEK
User's Manual - 19
8. Use the alignment sticker to drill mounting holes on the ceiling or wall. If preferred, drill a
routing hole. Install the camera by hammer in the wall anchors and drive screws.
A
9. When fastening the screws, do not completely tighten the screws. Pass cables through
the routing holes, and then mount the camera by passing the screw heads through the
keyhole slots. Turn the camera counter-clockwise, and then fasten the screws.

Vivotek FD9367-HTV Specifications

General

Brand	Vivotek
Model	FD9367-HTV
Category	Security Camera
Language	English