Vivotek FE8180 - Page 150

VIVOTEK
150 - User's Manual
trolmode vbr, fix quality
s<0~(m-1)>_mjpeg_quant 1~5
99, 100
3 4/4 Quality of JPEG video.
99 is the customized manual
input setting.
1 = worst quality, 5 = best
quality.
100 is percentage mode.
s<0~(m-1)>_mjpeg_qvalue 2~97 50 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant =
99)
s<0~(m-1)>_mjpeg_qperce
nt
1~100 49 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant =
100)
s<0~(m-1)>_mjpeg_maxfra
me
1~30 15 1/4 Set maximum frame rate in fps
(for JPEG).
s<0~(m-1)>_mjpeg_bitrate 1000~160000
00
s0:12000000
s1:1000000
s2:12000000
4/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_forcei 1 N/A 7/6 Force I frame.
s<0~(m-2)>_fisheyedewarp
mode
‘1O, 1P, 2P, 1R,
4R’ for ceiling,
1O 1/4 Local dewarp mode.
“1O” is original mode (disable).
Supported dewarp mode is
different by mount type.
(videoin_c<n>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<n>_local
dewarp_typeceilingmount) and
(capability_videoin_c<n>_local
dewarp_typewallmount)
wdrc_mode 0~2 0 4/4 WDR enhanced.
0: off
1: Sensitivity low
2: Sensitivity high
wdrc_strength 0~2 1 4/4 WDR enhanced.
0: low
1: medium
2: high
mounttype ceiling,
wall,floor
ceiling 1/6 Mount type