Vivotek FE8180 - Page 151

VIVOTEK
User's Manual - 151
enableimgreport 0, 1 0 1/6 Image report
enablewatermark 0, 1 1 1/6 Watermark
7.8.1.1 Alternative video input profiles per channel
In addition to the primary setting of video input, there can be alternative profile video input setting for each
channel which might be for different scene of light (daytime or nighttime).
Group: videoin_c0_profile_i<0~(m-1)> (capability. nvideoinprofile > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 4/4 Enable/disable this profile setting
policy schedule schedule 4/4 The mode which the profile is applied
to.
begintime hh:mm 18:00 4/4 Begin time of schedule mode.
endtime hh:mm 06:00 4/4 End time of schedule mode.
exposuremode auto,fixed auto 4/4 Exposure Mode
flickerless <boolean> 0 4/4 Avoid flickering on images.
minexposure 1~32000 32000 4/4 Minimum exposure time.
maxexposure 1~32000 30 4/4 Maximum exposure time.
enableblc <boolean> 0 4/4 Enable backlight compensation.
exposurelevel 0~12 6 4/4 Exposure level
agcmode auto,fixed auto 4/4 Set auto gain control mode.
maxgain 0~100 100 4/4 Manual set maximum gain value.
mingain 0~100 0 4/4 Manual set minimum gain value.
whitebalance auto, manual,
rbgain
auto 4/4 “auto” indicates auto white balance.
“manual” indicates keep current
value.
rgain 0~100 30 4/4 Manual set rgain value of gain
control setting.
bgain 0~100 30 4/4 Manual set bgain value of gain
control setting.
wdrc_mode 0~2 0 4/4 WDR enhanced.
0: off
1: Sensitivity low
2: Sensitivity high
wdrc_strength 0~2 1 4/4 WDR enhanced.
0: low