Vivotek FE8180 - Page 172

VIVOTEK
172 - User's Manual
audio_lineout <boolean> 0 0/7 Indicate whether to support line
output.
audioin_codec aac4, g711, g726
<product
dependent>
aac4, g711,
g726
0/7 Available codec list for audio
input.
audioout_codec g711
<product
dependent>
0/7 Available codec list for SIP.
audio_intmic <0~Positive
Integer>
1 0/7 (Internal Microphone, 0: Not
support, 1: Support)
(For Multi-CH,
bit 0 for CH0, bit 1 for CH1, etc.)
camctrl_httptunnel <boolean> 0 0/7 Indicate whether to support
httptunnel.
camctrl_httptunnelcl
ient <product
dependent>
<boolean> 0 0/7 Indicate whether to support
httptunnel client.
camctrl_privilege <boolean> 1 0/7 Indicate whether to support
“Manage Privilege” of PTZ
control in the Security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0 0/7 Indicate whether to support
HTTP tunnel for UART transfer.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode of
the machine: TX = server, Rx =
receiver box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to support
wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to support
wireless 802.11b+.