Vivotek FE8180 - Page 173

VIVOTEK
User's Manual - 173
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to support
wireless 802.11g.
wireless_encrypt_we
p
<boolean> 0 0/7 Indicate whether to support
wireless WEP.
wireless_encrypt_wp
a
<boolean> 0 0/7 Indicate whether to support
wireless WPA.
wireless_encrypt_wp
a2
<boolean> 0 0/7 Indicate whether to support
wireless WPA2.
wireless_beginchann
el
1 ~ 14 255 0/7 Indicate the begin channel of
wireless network
wireless_endchannel 1 ~ 14 255 0/7 Indicate the end channel of
wireless network
derivative_brand <boolean> 1 0/7 Indicate whether to support the
upgrade function for the
derivative brand. For example, if
the value is true, the VVTK
product can be upgraded to
VVXX. (TCVV<->TCXX is
excepted)
npreset 0, <positive
integer>
20 0/7 Number of preset locations
eptz 0, <positive
integer>
0 0/7 A 32-bit integer, each bit can be
set separately as follows:
Bit 0 => stream 1 supports ePTZ
or not.
Bit 1 => stream 2 supports ePTZ
or not.
The rest may be deduced by
analogy
nanystream 0, <positive
integer>
0 0/7 number of any media stream
per channel
iva <boolean> 0 0/7 Indicate whether to support
Intelligent Video analysis
tampering <boolean> 1 0/7 Indicate whether to support
tampering detection.
test_ac <boolean> 1 0/7 Indicate whether to support test
ac key.
version_onvifdaemo
n
<string> 1.8.0.6 0/7 Indicate ONVIF daemon version