Vivotek FE8181V - Page 168

VIVOTEK
168 - User's Manual
‘1O, 1P, 1R,
4R’ for wall
mount
mode is different by
mount type.
(videoin_c<n>_mount
type)
Supported mode list
could be extracted from
(capability_videoin_c<
n>_localdewarp_typec
eilingmount) and
(capability_videoin_c<
n>_localdewarp_typew
allmount)
wdrc_mode 0~2 0 4/4 WDR enhanced.
0: off
1: Sensitivity low
2: Sensitivity high
wdrc_strength 0~2 1 4/4 WDR enhanced.
0: low
1: medium
2: high
mounttype ceiling, wall,
floor
ceiling 1/6 Mount type
enableimgreport 0, 1 0 1/6 Image report
enablewatermark 0, 1 0 1/6 Watermark
7.8.1.1 Alternative video input profiles per channel
In addition to the primary setting of video input, there can be alternative profile video input setting for each
channel which might be for different scene of light (daytime or nighttime).
Group: videoin_c0_profile_i<0~(m-1)> (capability. nvideoinprofile > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 4/4 Enable/disable this profile setting
policy day,
night,
schedule
night 4/4 The mode which the profile is
applied to.
begintime hh:mm 18:00 4/4 Begin time of schedule mode.
endtime hh:mm 06:00 4/4 End time of schedule mode.
exposuremode auto,fixed auto 4/4 Exposure Mode