Vivotek FE8181V - Page 180

VIVOTEK
180 - User's Manual
7.23 camera PTZ control(Not used in FE8174/FE8173/FE8181)
Group: camctrl (capability.camctrl.httptunnel > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enablehttptunnel <boolean> 0 4/4 Enable HTTP tunnel for
camera control.
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
panspeed -5 ~ 5 0 1/4 Pan speed
tiltspeed -5 ~ 5 0 1/4 Tilt speed
zoomspeed -5 ~ 5 0 1/4 Zoom speed
focusspeed -5 ~ 5 0 1/4 Auto focus speed
patrolseq string[120] <blank> 1/4 (For external device)
The indexes of patrol points,
separated by “,”
patroldwelling string[160] <blank> 1/4 (For external device)
The dwelling time of each patrol
point, separated by “,”
preset_i<0~(npreset-1
)>_name
string[40] <blank> 1/4 Name of the preset location.
preset_i<0~(npreset-1
)>_ dwelling
0 ~ 999 0 1/4 The dwelling time of each preset
location
uart 0 ~ (m-1), m
is UART count
0 1/4 Select corresponding uart
(capability.nuart>0).
cameraid 0~255 1 1/4 Camera ID controlling external
PTZ camera.
isptz 0 ~ 2 0 1/4 0: disable PTZ commands.
1: enable PTZ commands with
PTZ driver.
2: enable PTZ commands with
UART tunnel.
disablemdonptz <boolean> 0 1/4 Disable motion detection on PTZ
operation.