Vivotek FE8181V - Page 190

VIVOTEK
190 - User's Manual
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0 0/7 Indicate whether to support HTTP
tunnel for UART transfer.
transmission_mo
de
Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireles
s
<boolean> 0 0/7 Indicate whether to support wireless.
wireless_s802do
t11b
<boolean> 0 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802do
t11g
<boolean> 0 0/7 Indicate whether to support wireless
802.11g.
wireless_encrypt
_wep
<boolean> 0 0/7 Indicate whether to support wireless
W E P.
wireless_encrypt
_wpa
<boolean> 0 0/7 Indicate whether to support wireless
WPA.
wireless_encrypt
_wpa2
<boolean> 0 0/7 Indicate whether to support wireless
WPA2.
wireless_beginch
annel
1 ~ 14 255 0/7 Indicate the begin channel of
wireless network
wireless_endcha
nnel
1 ~ 14 255 0/7 Indicate the end channel of wireless
network
derivative_brand <boolean> 1 0/7 Indicate whether to support the
upgrade function for the derivative
brand. For example, if the value is
true, the VVTK product can be
upgraded to VVXX. (TCVV<->TCXX
is excepted)
npreset 0, <positive integer> 20 0/7 Number of preset locations
eptz 0, <positive integer> 7 0/7 A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or
not.
Bit 1 => stream 2 supports ePTZ or