Vivotek FE8191 - Page 166

VIVOTEK
166 - User's Manual
99)
s<0~(m-1)>_mjpeg_qperce
nt
1~100 50 1/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant =
100)
s<0~(m-1)>_mjpeg_maxfra
me
1~12 12 1/4 Set maximum frame rate in fps
(for JPEG).
s<0~(m-1)>_mjpeg_bitrate 20000~40000
000
20000000
S2:512000
1/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_ mjpeg
_maxvbrbitrate
20000~40000
000
40000000 1/4 Set bit rate in bps when
choosing vbr in
“ratecontrolmode”.
s<0~(m-1)>_forcei 1 N/A 7/6 Force I frame.
s<0~(m-2)>_fisheyedewarp
mode
‘1O, 1P, 2P, 1R,
4R’ for
ceiling/floor
mount
‘1O, 1P, 1R, 4R’
for wall mount
1O 1/4 Local dewarp mode.
“1O” is original mode (disable).
Supported dewarp mode is
different by mount type.
(videoin_c<n>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<n>_local
dewarp_typeceilingmount) and
(capability_videoin_c<n>_local
dewarp_typewallmount)
wdrc_mode 0~3 0 1/4 WDR enhanced.
0: off
1: auto
2: always on
3: keep current value
wdrc_strength 0~2 1 1/4 WDR enhanced.
0: low
1: medium
2: high
mounttype ceiling, wall,
floor
ceiling 1/6 Mount type
enablewatermark 0, 1 1 1/6 Watermark