Vivotek FE8191 - Page 169

VIVOTEK
User's Manual - 169
high
enableextled <boolean> 0 1/6 External IR led enable
disableirled <boolean> FE8191 : 0
FE8391 : 1
1/6 Built-in IR led disable
sir <boolean> 0 1/6 Smart IR enable(external IR or
Built-in IR should be enabled)
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5,100 100 4/4 Adjust brightness of
image according to mode
settings.
brightnesspercent 0~100 0 4/4 Adjust brightnesspercent
of image
saturation -5~5,100 100 4/4 Adjust saturation of
image according to mode
settings.
100 for saturation
percentage mode.
saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
contrast -5~5,100 100 4/4 Adjust contrast of image
according to mode
settings.
contrastpercent 0~100 50 4/4 Adjust contrastpercent of
image
sharpness -5~5,100 100 4/4 Adjust sharpness of
image according to mode
settings.
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
gammacurve 0,45,50,60,70,80,90,100 0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low light
mode.