Vivotek FE8191 - Page 189

VIVOTEK
User's Manual - 189
camctrl_httptunnel <boolean> 0 0/7 Indicate whether to support
httptunnel.
camctrl_privilege <boolean> 1 0/7 Indicate whether to support
“Manage Privilege” of PTZ control in
the Security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0 0/7 Indicate whether to support HTTP
tunnel for UART transfer.
nprivacymask <positive
integer>
5 0/7 Number of privacy masks.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode of the
machine: TX = server, Rx =
receiver box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to support
wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to support
wireless 802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to support
wireless 802.11g.
wireless_s802dot11n <boolean> 0 0/7 Indicate whether to support
wireless 802.11n.
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to support
wireless WEP.
wireless_encrypt_wpa <boolean> 0 0/7 Indicate whether to support
wireless WPA.
wireless_encrypt_wpa2 <boolean> 0 0/7 Indicate whether to support
wireless WPA2.
wireless_beginchannel 1 ~ 14 N/A 0/7 Indicate the begin channel of
wireless network
wireless_endchannel 1 ~ 14 N/A 0/7 Indicate the end channel of wireless
network
derivative_brand <boolean> 1 0/7 Indicate whether to support the
upgrade function for the derivative
brand. For example, if the value is