Vivotek IP7137 - Application Page CGI Command

- 62 -
www.vivotek.com
NAME VALUE DESCRIPTION
0 disable remote log enableremotelog
(r/w)
1 enable remote log
serverip
(r/w)
<IP address> Log server IP address
serverport
(r/w)
<514> Server port used for log
Application page CGI command
Note: This request requires administrator privilege.
Method: GET/POST
Syntax (For snapshot):
http://<servername>/cgi-bin/admin/gen-new-eventd-conf.cgi
?
[<prefix_app_index>_snapshot_enable=<value>]
[&<prefix_app_index>_weekday=<value>]
[&<prefix_app_index>_time_method=<value>]
[&<prefix_app_index>_begin_time=<value>]
[&<prefix_app_index>_end_time=<value>]
[&<prefix_app_index>_prefix=<value>]
[&<prefix_app_index>_trigger_type=<value>]
[&<prefix_app_index>_md_win=<value>]
[&<prefix_app_index>_md_prenum=<value>]
[&<prefix_app_index>_md_postnum=<value>]
[&<prefix_app_index>_md_delay=<value>]
[&<prefix_app_index>_sq_interval=<value>]
[&<prefix_app_index>_send_method=<value]
[&<prefix_app_index>_ftp_suffix=<value>]
Syntax (For videoclip):