Upload daylight saving time rule: Click Browse… and specify the XML le to upload. To enable the DST,
please refer to System Time on page 22�
If the incorrect date and time is assigned, you will see the following warning message when uploading
the le to the Network Camera.
The following message is displayed when attempting to upload an incorrect le format.
Backup / Restore
Click Backup to export all parameters of the device and user-dened script.
Click Browse… to select a setting backup le, then click Restore to upload the backup le. Please note
that the model and rmware version of the device should be the same as the setting backup le. If you
have set up xed IP or other special settings for your device, it is not suggested to upload a settings
backup le.
Upgrade Firmware
This feature allows you to upgrade the rmware of your Network Camera. It takes a few minutes to
complete the process�
Note: Do not power off the Network Camera during the upgrade!
To Next Page
Loading...
