VIVOTEK
118 - User's Manual
Patrol Settings
You can select some preset positions for the Network Camera to patrol through them.
Please follow the steps below to set up a patrol schedule:
1. Select preset locations on the list and click on the >> button. They will be replicated to the Patrol
Locations.
2. Set the Dwelling time for the eld of view to stay at the preset location during patrol. You can
also manually enter a value in the blank.
3. If you want to delete a selected location, select it from the list and click Remove.
4. Select a location and click the arrow buttons to rearrange the patrol order.
5. Click Save to enable the settings.
2015/1/20 10:19:10
1
2
5
43
To Next Page
Loading...
