VIVOTEK
User's Manual - 7
Physical Description
Waterproof cable
gland
Power Supply Unit
Circulation
fan
Heater for the dual-heater,
-40ºC model
Heater
IMPORTANT:
1. Disconnect devices: A readily accessible disconnect device in the building installation wiring
should be incorporated.
2. Electrical Connection: Only a qualied electrician is allowed to make electrical connections.
3. If you plan to install this camera enclosure into a tropical, sea coastal, or an environment
where salt water or corrosive industrial waste water/moist are present, please seal each
stainless steel screws and ttings with a silicon grease compounds. This will help prevent
electrolysis to occur and extend the life span of the camera and housing.
To Next Page
Loading...
