Vivotek IP816A-LPC - Page 188

VIVOTEK
188 - User's Manual
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5,100 100 4/4 Adjust brightness of image according to mode
settings.
saturation -5~5,100 100 4/4 Adjust saturation of image according to mode
settings.
100 for saturation percentage mode.
contrast -5~5,100 100 4/4 Adjust contrast of image according to mode
settings.
sharpness -3~3,100 100 4/4 Adjust sharpness of image according to mode
settings.
brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of image
saturationpercent 0~100 50 4/4 Adjust saturation value of percentage when
saturation=100
contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
sharpnesspercent 0~100 50 4/4 Adjust sharpnessvalue of percentage when
sharpness=100
gammacurve 0~100 0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
dnr_mode 0~1 1/0 4/4 0:disable
1:enable
Note: default dnr_mode value is product
dependent.
HP is 1.
LPC(Parkinglot) is 0.
LPC(Street) is 0.
dnr_strength 1~100 50 4/4 Strength of DNR
eis 0~1 0 4/4 Electronic image stabilizer
0:disable
1:enable
scene_enable 0~1 1 4/4 Scene mode
0: disable
1: enable
* Only available when
"capability_image_c<n>_scenemode_support"
is 1
scene_mode lpcstreet lpcstreet 4/4 Value of scene mode