Vivotek SD8333-E - Page 151

VIVOTEK
User's Manual - 151
s3:6000000
s<0~(m-1)>_h264_maxfra
me
1~60 s0 : 60
s1 : 60
s2 : 15
s3 : 60
1/4 Set maximum frame rate in fps
(for H264).
s<0~(m-1)>_h264_profile 0~2 1 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpeg_priority
policy
framerate,
imagequality
S0: frame rate
S1: frame rate
S2: image
quality
S3: image
quality
4/4 The policy to apply when the
target bit rate is not sufficient to
satisfy current encoded
conditions.
“framerate” indicates frame rate
first.
“imagequality” indicates image
quality first.
s<0~(m-1)>_mjpeg_maxvb
rbitrate
1000~400000
00
40000000 4/4 Jpeg max vbr bitrate
s<0~(m-1)>_mjpeg_ratecon
trolmode
cbr, vbr s0:vbr,
s1: vbr,
s2: vbr,
s3: vbr
4/4 cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_mjpeg_quant 1~5,
99, 100
3 4/4 Quality of JPEG video.
99 is the customized manual
input setting.
1 = worst quality, 5 = best
quality.
100 is percentage mode.
s<0~(m-1)>_mjpeg_qvalue 2~97 49 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant =
99)
s<0~(m-1)>_mjpeg_qperce
nt
1~100 50 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant =
100)
s<0~(m-1)>_mjpeg_maxfra
me
1~60 s0:10,
s1:10,
s2:15,
s3:10
1/4 Set maximum frame rate in fps
(for JPEG).