Vivotek SD8333-E - Page 177

VIVOTEK
User's Manual - 177
audioout_codec g711 g711 0/7 Available codec list for SIP.
camctrl_httptunnel <boolean> 0 0/7 Indicate whether to
support httptunnel.
camctrl_privilege <boolean> 1 0/7 Indicate whether to
support “Manage
Privilege” of PTZ control in
the Security page.
1: support both
/cgi-bin/camctrl/camctrl.c
gi and
/cgi-bin/viewer/camctrl.cg
i
0: support only
/cgi-bin/viewer/camctrl.cg
i
uart_httptunnel <boolean> 0 0/7 Indicate whether to
support HTTP tunnel for
UART transfer.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission
mode of the machine: TX
= server, Rx = receiver
box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to
support Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to
support wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to
support wireless
802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to
support wireless 802.11g.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to
support wireless 802.11n.
wireless_beginchannel 1 ~ 14 N/A 0/7 Indicate the begin channel
of wireless network
wireless_endchannel 1 ~ 14 N/A 0/7 Indicate the end channel
of wireless network
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to
support wireless WEP.