Vivotek SD8333-E - Page 180

VIVOTEK
180 - User's Manual
supportsd <boolean> 1 0/7 Indicate whether to
support local storage.
remotecamctrl_master 0, <positive
integer>
0 0/7 Indicate whether to
support remote auxiliary
camera (master side), this
value means supporting
max number of auxiliary
camera.
remotecamctrl_slave <boolean> 1 0/7 Indicate whether to
support remote camera
control (slave side).
adaptiverecording <boolean> 1 0/7 Indicate whether to
support adaptive
recording.
adaptivestreaming <boolean> 1 0/7 Indicate whether to
support adaptive
streaming.
vadp <positive
integer>
251 0/7 An 32-bit integer, each bit
can be set separately as
follows:
Bit 0 => VADP interface
Bit 1 => Capture video
raw data
Bit 2 => Support encode
jpeg
Bit 3 => Capture audio
raw data
Bit 4 => Support event
trigger
Bit 5 => Support license
registration
Bit 6 => Support shared
memory API
privacymask_axistype 0,1,2 2 0/7 Describes the technical
method in which to
implement a privacy
mask.
0 (Unidentified. The
firmware is in an earlier
version)