36 37
Problem resolved
Yes
Is Boiler Power
Light ON?
Allow 15-20 minutes
for Boiler to fill and
heat to temperature
Yes
No
Is Ready Light ON?
Is Ready Light ON?
No
No
Yes
Unplug the Boiler
and plug back in.
Press Power Button
to turn power on.
Make sure Boiler is
plugged into a
working outlet.
Press Power Button
to turn power ON.
Replace Boiler
Replace Boiler
Problem resolved
Replace Boiler
Problem resolved
No Hot Water
Yes
Yes
Yes
Is Boiler
Power Light
ON?
No
Yes
Is Hot Water
dispensing now?
No
Problem resolved
Problem resolved
Do both
Still and Sparkling
Water have a bad
taste?
Yes
No
No
Sanitize and replace
Filter.
Problem resolved
Replace
Boiler Filter.
Water Tastes Bad
Yes
Does only
Sparkling Water
have a bad
taste?
Yes
Does only
Hot Water
have a bad
taste?
Bad CO2 Cylinder
Turn OFF the Power Switch
on the back of the Unit and
dispense Sparkling Water
until only CO
2 is dispensed.
Turn off the CO
2 Cylinder and
dispense Sparkling Water to
release all CO2 pressure.
Replace CO
2 Cylinder and
open Valve, dispense the
Sparkling Water for 5 seconds
to flush any residual CO2.
Turn the Power Switch back
ON and allow carbonator to
cycle.
Retest.
Problem resolved
To Next Page
Loading...
