26
Connecting a PC (Computer)
1. Turn off the power to the LCD HDTV and PC Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input at the rear of the LCD HDTV.
3. Using a 1/8” stereo cable, connect the Audio Out on your personal computer to the RGB PC
Audio input at the rear of the LCD HDTV.
4. Turn on the power to the LCD HDTV and Computer.
5. Select RGB using the INPUT button on the remote or side of the LCD HDTV.
Note:
• For a better picture quality when connecting a personal computer through RGB PC, set
your computer timing mode to VESA either 1360x768 at 60Hz (E320VA model) or
1920x1080 at 60Hz (E321VA, E370VA and E420VA model) .
• Refer to your personal computer user manual for more information about the video output
requirements of the product.
• A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.
To Next Page
Loading...
Need help?
General
