30
Setting the Picture to User’s Preferences
1. Press OK on the remote control. The Main menu opens.
2. Press the Navigation arrow keys to select Picture, and
then press the OK key. The Picture Settings menu
opens.
3. Press ▲or ▼ to select Picture mode.
4. Press ◄ or ►to select Custom mode.
5. Press OK key to select it.
6. The Custom menu opens. Parameters as Backlight,
Brightness, Contrast, Color, Tint and Sharpness are
adjustable, Noise Reduction is switchable On or Off.
Contrast Enhancement, Color Stretch and DCR are
switchable On or Off, Make the desired changes and exit
the menu by pressing EXIT on the remote control.
7. If More is selected,
then the options
are: Color
Temperature
which allows to adjust the balance or intensity of Red,
Green and Blue colors, Color Enhancement, Adaptive
Luma and DCR (Dynamic Contrast Ratio) are switchable
options. The option to reset the settings is also available in
this submenu, it allows the modified values to be set to
manufacturer’s
settings if desired.
Exit the entire
OSD by pressing
EXIT or return to
previous screen
menu by either
pressing the LAST
button on the
remote control or
by selecting the ◄
on top left hand side next to Picture Settings.
To Next Page
Loading...
Need help?
General
