Vizio E190VA - Channel Setup and Customization

10
5
E190VA/E220VA/E260VA
Removing Unused Inputs from the Input List
To remove unused inputs:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the Input icon and press
MENU/OK.
3. Use the Arrow buttons to highlight
Input Naming and press MENU/OK.
4. Use the Arrow buttons on the remote
to highlight the input source you wish
to remove, then press MENU/OK.
5. Use the Arrow buttons to highlight
Skip Input and press MENU/OK.
6. Press EXIT.
To restore an input to the list, go to the Input Naming screen and
select Reset.
Setting Up Channels
From the channel menu you can:
• Changethesignalsource
• Customizethemasterchannellist
• Scanfornew/additionalchannels
• Startanewchannelscan
• Customizechannelnames
Changing the Signal Source
Using this option, you can change the signal source for the coaxial (TV) input.
To change the signal source:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the TV icon and press
MENU/OK. The TV Settings menu is
displayed.
3. Use the Arrow buttons to highlight
Channels and press MENU/OK.
4. Use the Arrow buttons to highlight
Signal Source.
5. Use the Arrow buttons to change the
setting to Cable or Antenna.
6. Press EXIT.