VIZIO E322VL User Manual
Version 5/25/2010 13
www.VIZIO.com
Chapter 2 Basic Controls and Connections
Front Panel
1. POWER ‘VIZIO’ LIGHT—The VIZIO name lights white
when powered on and orange when powered off.
2. Remote Control Sensor—Point the remote control
directly at this window on the lower left corner of your
HDTV for the best response to the remote signal.
Side Panel Controls
POWER ( )—Turn your HDTV on by pressing the button
once. Press the button again to turn your HDTV off.
MENU—Press to launch the on-screen menu. If a sub-menu is
active, this button will proceed to the next level.
CH
▲/▼—Press to change the channels up or down. While the
menu is active, these buttons function as up and down controls.
VOL + / - —Press to increase or decrease the speaker volume.
While the menu is active, these buttons function as left and right
controls.
INPUT (ENTER) —Press to cycle through the various devices
connected to your TV (called Inputs). The inputs cycle in the
following sequence: TV, AV, Comp, HDMI-1, HDMI-2, HDMI-Side,
and RGB. After you have stepped through the entire sequence,
you will return to the beginning.
Additionally, when the OSD is active, this button confirms the
menu function to be adjusted.
Side Panel Connections
1. USB:
Insert a FAT/FAT32 formatted USB drive to view pictures.
Service port for use by a professional service technician.
2. HDMI SIDE—Connect digital video devices such as a DVD player or
Set-Top Box through this all digital connector. There are additional
HDMI connectors on the back.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
