Vizio E322VL User Manual

VIZIO E322VL User Manual
44
www.VIZIO.com
Audio Troubleshooting
Issue Solution
No audio
 Press Volume + (Up) on the remote control or side of the TV.
 Press MUTE on the remote control to make sure that MUTE is not ON.
 Check the MTS Audio settings in the Tuner menu to insure they are set to
Stereo/English. ( TV input only )
 Verify that the TV Speakers are On in the Audio menu.
 Check the video/device cable integrity. Try another cable (HDMI,
AV/Composite, Coax etc.)
 Change audio settings of the external device.
 If you are using an antenna, the signal strength of the channel may be low.
Make sure your antenna is connected securely to your HDTV and move the
antenna to an alternate location in the room or close to a window.
Audio volume differs on
each input
Your HDTV will retain the last used volume level for each input.
Low audio volume (TV
internal speakers)
 Press the Volume up on the remote control.
 Increase the volume of the external device using that device’s remote.
Distorted/popping audio
 Check video/device cable integrity. Try another cable (HDMI, AV/Composite,
Coax etc.)
 Insure audio cables are tightly inserted into inputs.
 Try another device.
 Use another device input.
Remote Control Troubleshooting
Issue Solution
The remote control will not
work
 Point the remote control directly at the remote sensor on your TV (IR mode
only).
 Remove any obstacles between the remote control and the remote sensor (IR
mode only).
 Replace dead batteries with new ones.
The remote control will not
adjust TV Volume.
 Check the Advanced Audio menu located in the HDTV Settings App. Audio
control must be set to TV.
Channel Up and Down
buttons will not work.
 In the HDTV Settings App, select Tuner, then Auto Channel Scan. This must
be performed before attempting to change channels.

Vizio E322VL Specifications

General

Response time	8 ms
Display diagonal	32 \
Progressive scan	No
Display brightness	500 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Supported video modes	1080i, 480i, 480p
Contrast ratio (dynamic)	50000:1
Display number of colors	1.073 billion colors
Supported graphics resolutions	1024 x 768 (XGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Certification	CSA, CSA-US, FCC Class B
HDCP	Yes
RF ports quantity	1
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Sustainability certificates	ENERGY STAR
Product color	Black
Panel mounting interface	200 x 200 mm
Power consumption (typical)	98.39 W
Power consumption (PowerSave)	0.37 W
RMS rated power	10 W
Analog signal format system	NTSC
Digital signal format system	ATSC

Weight and Dimensions

Depth (with stand)	210 mm
Width (with stand)	792.23 mm
Height (with stand)	570.2 mm
Weight (with stand)	9020 g
Depth (without stand)	89.4 mm
Height (without stand)	565.9 mm
Weight (without stand)	8500 g