Vizio E322VL User Manual

VIZIO E322VL User Manual
Version 5/25/2010 23
www.VIZIO.com
Using Coaxial (Antenna) (Good)
1. Turn off the power to your HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital cable to the DTV/TV
CABLE/ANTENNA connector on your HDTV.
3. Turn on the power to your HDTV.
4. Select TV using the INPUT button on the remote control or side of the TV.
5. Search for new channels. See Auto Channel Search on page 36 for more information on
scanning for channels.
Connecting Your DVD Player
Using HDMI (Best)
DVD players that have a HDMI digital interface should be connected using HDMI for optimal results. To
maintain image quality, use a VIZIO certified HDMI cable. This cable is available in 6, 15, and 30 foot
lengths. Visit www.VIZIO.com or call 877-MYVIZIO (877-698-4946) for details.
1. Turn off your HDTV and DVD player.
2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI 1 or
2 jack on your HDTV.
3. Turn on the power to your HDTV and your DVD player.
4. Select HDMI-1, HDMI-2, or HDMI-SIDE using the INPUT button on the remote control or side of
the TV.
Notes:
 The HDMI input on your HDTV supports High-bandwidth Digital Content Protection (HDCP). HDCP
encrypts the transmission between the video source and the digital display for added security and
protection.
 Refer to your DVD player user manual for more information about the video output requirements.

Vizio E322VL Specifications

General

Response time	8 ms
Display diagonal	32 \
Progressive scan	No
Display brightness	500 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Supported video modes	1080i, 480i, 480p
Contrast ratio (dynamic)	50000:1
Display number of colors	1.073 billion colors
Supported graphics resolutions	1024 x 768 (XGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Certification	CSA, CSA-US, FCC Class B
HDCP	Yes
RF ports quantity	1
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Sustainability certificates	ENERGY STAR
Product color	Black
Panel mounting interface	200 x 200 mm
Power consumption (typical)	98.39 W
Power consumption (PowerSave)	0.37 W
RMS rated power	10 W
Analog signal format system	NTSC
Digital signal format system	ATSC

Weight and Dimensions

Depth (with stand)	210 mm
Width (with stand)	792.23 mm
Height (with stand)	570.2 mm
Weight (with stand)	9020 g
Depth (without stand)	89.4 mm
Height (without stand)	565.9 mm
Weight (without stand)	8500 g