VIZIO E322VL User Manual
Version 5/25/2010 27
www.VIZIO.com
COMPUTER
Using HDMI
1. Turn off your HDTV and computer.
2. Connect a HDMI cable to the HDMI output of your computer and the other end to the HDMI 1 or
jack on your HDTV.
3. Turn on the power to your HDTV and your computer.
4. Select HDMI-1, HDMI-2, or HDMI-SIDE using the INPUT button on the remote control or side of
the TV.
Ethernet Connection
The Ethernet function on your HDTV is used to access the Internet. Your HDTV also has 802.11n
wireless, so you can connect your TV through your wireless home network. A wired connection can
sometimes deliver a more consistent connection depending on the conditions in your home environment.
See Network Menu on page 34 for detailed information on setting up your Internet connection.
1. Connect one end of an Ethernet cable (not supplied) to the Ethernet jack on your TV.
2. Connect the other end of the Ethernet cable to your home network (usually your router). Your
home network must have broadband Internet access such as cable or DSL.
A small number of users may need to manually adjust the network settings. See Network Menu on page
34 for detailed information on configuring your Internet connection.
o If you need additional help setting up your network, please refer to the user manual
for your router or contact the manufacturer of either your router or your Internet
service provider if they provided the router for you.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
