VIZIO M470NV/M550NV User Manual
Version 6/28/2010 41
www.VIZIO.com
Bluetooth Audio
Turn Bluetooth audio On or Off. Bluetooth Audio enables or disables the output of sound to your
Bluetooth receiver, such as a Bluetooth headphone.
Equalizer Settings
To select the options in the Equalizer Settings sub-menu, press OK. A new menu will be
displayed showing the available equalizer functions. Press ◄ or ► to select Basic or Advanced.
EQ Mode (Basic)
Adjust Bass and Treble.
EQ Mode (Advanced)
Adjust boost or attenuation of
different frequencies.
Starting from lowest to the highest,
they are 100 Hz, 300Hz, 1 kHz, 3
kHz and 10 kHz.
1. Press ▼ then◄ or ► to
select the frequency to be
adjusted. Press OK.
2. Press ▲ or ▼ to adjust the
selected frequency to your
preference. Values above 0
will boost the frequency and
values below 0 will attenuate
the frequency.
Note: The Equalizer adjustment will only be available when SRS TSHD is set to Off.
Tuner
When you first turned on your HDTV you scanned for channels using the Setup App. If you did not do this
or if your setup has changed, you can do this from the Tuner menu.
Note: The tuner option can only be selected when your HDTV is in TV input mode.
Tuner Mode
Select Cable or Antenna depending
upon which equipment you have
attached to the DTV / TV Input.
Auto Channel Search
Automatically search for TV channels
that are available in your area. Be
sure to first select the correct tuner
mode above. The TV will search for
analog and digital channels. When the
search is done, press EXIT to begin
watching your programs.
To Next Page
Loading...
Need help?
General
