EasyManuals Logo

Vizio M470NV Razor LED User Manual

Vizio M470NV Razor LED
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
VIZIO M470NV/M550NV User Manual
Version 6/28/2010 51
www.VIZIO.com
Chapter 9 Maintenance and Troubleshooting
Cleaning the TV and Remote Control
1. Remove the power adapter cable from the TV.
2. Use a soft cloth moistened with diluted neutral cleaner to clean the TV and remote control. VIZIO
recommends using an HDTV cleaning solution which can be purchased at any major retailer.
3. Wring liquid out of the cloth before cleaning to prevent water from penetrating into the housing.
4. Wipe the TV and remote control with a dry cloth after cleaning.
Important:
Do not use volatile solvents (such as toluene, rosin and alcohol). Such chemicals may damage
the housing, screen glass, and remote control, and cause labeling to peel.
The screen glass is very fragile. Do not scrape it with any sharp object.
Do not press or tap the screen to avoid cracking.
Troubleshooting Guide
If the TV fails or the performance changes dramatically, check the display in accordance with the
following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the
display still fails to perform as expected, contact the VIZIO for assistance by calling 877-MYVIZIO (877-
698-4946) or e-mail us at
techsupport@VIZIO.com.
TV/Display Troubleshooting
Issue Solution
No Signal” is shown on
display
Press INPUT to select the correct input source for the device you are
attempting to use.
Insure that the desired device is powered ON.
Check the connections of external devices that may be connected to your
HDTV
Check video/device cable integrity. Try another cable (HDMI, Component,
AV/Composite, Coax etc.)
“No RGB Signal. Power will
be turned off” is shown on
display
When using the RGB Input to connect to a computer, please insure that a
supported PC desktop resolution Is first selected.
If no computer is connected, press INPUT to select a different input source.
Note: If no computer is connected, and the input is not changed, the television
will power off.
No power (VIZIO logo is off)
Make sure your AC power cable is securely connected to the back of the
television and wall outlet.
Plug another electrical device into the outlet to insure the outlet is working
correctly.
Try another electrical outlet elsewhere in your home. Preferably on a different
circuit.
Try another AC power cable. Any standard 3 prong, grounded, UL approved
computer power cable can provide power to your television.

Table of Contents

Other manuals for Vizio M470NV Razor LED

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vizio M470NV Razor LED and is the answer not in the manual?

Vizio M470NV Razor LED Specifications

General IconGeneral
BrandVizio
ModelM470NV Razor LED
CategoryLCD TV
LanguageEnglish

Related product manuals