How to turn on Vizio V20x-J8 when there is no power?
If your Vizio Speaker System isn't powering on, start by pressing the POWER button on the remote or on the top of the sound bar. Make sure the power cord is securely connected to both the speaker and the electrical outlet. To ensure the outlet is working correctly, plug a different device into it.
What to do if the Vizio V20x-J8 Speaker System remote isn’t working?
If the remote for your Vizio Speaker System isn’t working, begin by replacing the batteries with new ones. When pressing a button, point the remote directly at the center of the sound bar. If you're using a Bluetooth connection, note that some buttons on the remote may not be supported by the streaming application.
Why is there no sound coming from my Vizio V20x-J8?
If your Vizio Speaker System has no sound, first increase the volume to ensure it's not simply set too low. Also, verify that the sound bar isn't muted by pressing the MUTE button on the remote. Try selecting different input sources by pressing the INPUT button. If you are using Digital Optical input, set the TV output to PCM. Some TVs do not pass through digital audio, so connect directly to your Blu-ray or another source. Ensure the source is set to output PCM and confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Finally, if using Bluetooth, check that the volume on your source device is turned up and that the device is not muted.
How to stop buzzing or humming sound from Vizio Speaker System?
If you hear buzzing or humming from your Vizio Speaker System, first ensure all cables and wires are securely connected. Try connecting a different source device (TV, Blu-ray player, etc.) to see if the buzzing persists. Also, try connecting your device to a different input on the sound bar.
General| Sustainability certificates | RoHS |
|---|---|
| Wi-Fi | - |
| AUX in | Yes |
| Bluetooth version | 4.1 |
| Connectivity technology | Wired & Wireless |
| Audio decoders | DTS Digital Surround, DTS TruVolume, DTS Virtual:X |
| Equalizer modes | Movie, Music, Standard |
| RMS rated power | - W |
| Audio output channels | 2.0 channels |
| AC input voltage | 100-240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (typical) | 60 W |
| Number of speakers | 2 |
| Product color | Black |
| Audio formats supported | WAV |
| Network streaming services supported | Pandora, Spotify |
| Package depth | 142.2 mm |
| Package width | 680.7 mm |
| Package height | 124.5 mm |
Weight and Dimensions| Depth | 81.3 mm |
|---|---|
| Width | 609.6 mm |
| Height | 57.9 mm |
| Soundbar weight | 1700 g |
Explains the rear panel connections and ports.
Details additional rear panel connections and ports.
Identifies and explains controls on the top of the sound bar.
Instructions for connecting the sound bar to a TV using various cables.
Steps to connect the power cable and plug into an outlet.
Explains the LED behavior upon first power-on and auto input detection.
Details Factory Reset, TV Remote Control, and Eco Power Mode functions.
Solutions for no power, no sound, buzzing, and remote issues.
To Next Page
