VIZIO VA26L HDTV10T User Manual
Version 4/23/2010 10
www.VIZIO.com
Chapter 2 Basic Controls and Connections
Front Panel
Power Indicator (VIZIO logo)— When in standby
mode the logo is orange, it turns to white when TV
is turned on.
Remote Control Sensor—Point the remote control
directly at this window on the lower right corner of
your HDTV for the best response to the remote
signal.
Light Sensor— Activate it through the OSD menu
if you would like the TV to automatically adjust to
the ambient lighting of the room.
Side Control Panel
POWER ( )—Turn your HDTV on by pressing the button once.
Press the button again to turn your HDTV off.
MENU—Press to launch the on-screen menu. If a sub-menu is
active, this button will proceed to the next level.
CH
▲/▼—Press to change the channels up or down. While the
menu is active, these buttons function as up and down controls.
VOL
▲/▼—Press to increase or decrease the speaker volume.
While the menu is active, these buttons function as left and right
controls.
To Next Page
Loading...
Need help?
General
