VIZIO VA370M User Manual
Version 7/23/2009 11
www.VIZIO.com
Chapter 1 Basic Controls and Connections
Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights white
when powered on and it will get dimmer when powered
off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to
the sensor. Point the remote control directly at this
window for the best response to the remote signal.
Side Panel Controls
button once. Press the button again to power the TV off.
MENU – This button activates the On Screen Display (OSD). If a
sub-menu is active, pressing this button will return to the previous
menu level.
CH
!" - – Use these buttons to step up or
down the TV channels. While the OSD is
active, these buttons function as up and down
controls in the OSD menus.
VOL
#$ – Use these buttons to increase or
decrease to the speaker volume. While the
OSD is active, these buttons function as left
and right controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this
button steps through the input sources in the
following sequence: DTV/TV, AV(S-Video),
Comp1, Comp2, HDMI1, HDMI2, HDMI3, HDMI-Side, RGB,
Photos and Music. Once you have stepped through the entire sequence, you will
return to the beginning of the sequence.
Additionally, when the OSD is active, this button confirms the menu function to be
adjusted. When the OSD is not active, this button will show the current input
selections.
To Next Page
Loading...
Need help?
General
