VIZIO VA370M User Manual
Version 7/23/2009 23
www.VIZIO.com
For DVD Players with DVI:
1. Turn off the power to the LCD HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the
HDMI Input (green color area) at the side of the LCD HDTV.
3. Using an audio cable (1/8’ stereo connector on the going into the TV), connect the cable to
the audio output connectors associated with the DVI output on your HDTV Set-Top Box and
connect the other end to the audio associated with the RGB input (blue area) at the rear of
the LCD HDTV.
4. Turn on the power to the LCD HDTV and your DVD player.
5. Select HDMI-Side using the INPUT button on the remote or side of the LCD HDTV, or directly
by pressing the HDMI button on the Remote Control.
Note:
! If you are already using the HDMI input for another component, or you do not want to use the
HDMI input for the DVD Player, you can connect the DVD player to the HDMI1, HDMI2 or HDMI3
connection. The LCD TV will recognize the DVI connection and obtain audio information from the
audio connectors on the rear of the TV.
! Refer to your DVD player user manual for more information about the video output requirements
of the product.
To Next Page
Loading...
Need help?
General
