System Adjustments
Entering DIAGNOSTICS mode
Turn the system off, push and hold OFF button for 5 sec. The
display will show DIAGNOSTICS, release the OFF button.
The system will slowly scroll through menu headings.
Entering a Heading
When the heading that you want is displayed, press and hold the ON
button. When it enters that selection, release the ON button.
Scrolling
While in a heading, you can scroll through data and variables by
using the ON and OFF buttons just like up and down arrows on a
keyboard.
Exiting a heading
Once changes have been made, press and hold both ON and OFF
buttons at the same time, and the system will return to the
DIAGNOSTICS main menu.
Exiting DIAGNOSTICS mode
While DIAGNOSTICS is displayed, press and hold both ON and OFF
buttons at the same time.
Menu Headings
DIAGNOSTICS
Used to return to normal operation.
Press and hold both the ON and OFF buttons at the same time to
exit Diagnostics mode and return to normal operation.
ERROR LOG
Record of the last ten system errors.
This information can be recorded on the VMAC troubleshooting form
and faxed to VMAC to assist in troubleshooting issues. Scroll
through each error with the ON and OFF buttons.
To Next Page
Loading...
