EasyManua.ls Logo

Vmac S700078 User Manual

Vmac S700078
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
C# 001126
VR70 Air Compressor
Installation Manual
Kubota V3600
SYSTEM S700078
Question and Answer IconNeed help?

Do you have a question about the Vmac S700078 and is the answer not in the manual?

Vmac S700078 Specifications

General IconGeneral
BrandVmac
ModelS700078
CategoryAir Compressor
LanguageEnglish

Summary

Important Safety Notice

System Depressurization Warning

Critical warning about depressurizing the system before servicing.

Safety Messages and Precautions

Operational Hazards

Fire and Explosion Risks

Potential fire and explosion hazards when operating the compressor.

Personal Safety Hazards

Risks to personal safety, including breathing compressor air.

System Safety and Pressure Regulation

Routine Maintenance Procedures

Maintenance Schedule and Torque

Maintenance Intervals and Checks

Start-up Procedure

Compressor Start-up Steps

Shutdown Procedure

Oil Level Check Procedure

Oil Capacity and System Servicing

Information on the compressor's oil capacity and servicing needs.

Dipstick Reading and Interpretation

Detailed steps for checking and reading the oil level on the dipstick.

Adding Compressor Oil

Oil Level Interpretation Guide

Guidance on understanding the oil level marks on the dipstick.

VMAC Approved Oil Usage

Instructions for filling with approved oil and performing final checks.

Pressure Supply Valve Inspection

Compressor Component Inspection

Air Line and Hose Inspection

Compressor Oil Replacement

Preparation for Oil Drainage

Cleaning the drain valve area to prevent contamination before draining oil.

Draining the Compressor Oil

Procedure for draining the old oil from the oil/air separator tank.

Oil Disposal and Refilling

Refilling System with New Oil

Instructions for refilling the system with the specified amount of VMAC oil.

Oil Filter Replacement Procedure

Filter Area Cleaning

Cleaning the manifold block and filter area before replacing the oil filter.

Removing the Old Oil Filter

Steps to remove the oil filter using a wrench.

Installing the Oil Filter

Proper Filter Tightening

Applying oil to the gasket and tightening the filter correctly to avoid damage.

Air Filter Replacement Steps

Filter Cover Area Preparation

Cleaning dust and debris around the compressor and filter cover.

Removing Air Filter Components

Procedure for removing the air filter cover retainer and cover.

Installing the Air Filter

Coalescing Filter Replacement

Threaded Nipple and Gasket Check

Checking the threaded nipple and gasket sealing surface for the coalescing filter.

Installing the Coalescing Filter

System Diagnosis and Troubleshooting

Troubleshooting Common Issues

Related product manuals