2.6 Check compressor for damage
Follow all safety precautions.
2.6.1 Before starting the engine, open the service door and visually
inspect the compressor for:
• cracks in the case
• oil leaks at the seams
• loose mounting bolts
• all the hoses and fittings are secure
2.7 Check air lines and hoses for damage
Follow all safety precautions.
2.7.1 Trace all the airlines and hoses looking for chaffing against
each other or metal edges. If chaffing is seen, use plastic
convoluted loom to protect the area on the hose or airline.
2.7.2 Check that all the lines and hoses are secure. If loose hoses
are seen, secure the hoses using tie straps.
2.7.3 Examine the hoses and air lines for cuts or cracks.
2.7.4 If any of the airlines or hoses show damage they should be
replaced by an authorized VMAC Service Centre before
operating the equipment.
To Next Page
Loading...
