Need help?Do you have a question about the Vmac VR7000 and is the answer not in the manual?
General| Brand | Vmac |
|---|---|
| Model | VR7000 |
| Category | Air Compressor |
| Language | English |
Provides installation instructions for the VMAC underhood air compressor kit and Throttle Commander.
Outlines the four main steps of the installation procedure for the air compressor system.
Defines terms like OEM and acronyms like HHCS and SHCS used in the manual.
Details initial steps before installing the compressor, including disconnecting the battery and removing OEM parts.
Instructions for mounting the VR7000 bracket and attaching the compressor and power steering pump.
Guidance on mounting the remote filter assembly to the VR7000 mounting bracket.
Procedure for installing the oil cooler, with steps for standard and heavy duty models.
Final steps for Part 1, including lowering the radiator, installing cowlings, and fitting the belt.
Details mounting the tank using frame clamps and adjusting brackets for precise positioning.
Step-by-step instructions for connecting various air and oil lines to the compressor and tank.
Procedure for filling the system with the specified compressor oil and checking the level.
Final checks for lines, fittings, belts, hoses, and coolant level after installation.
Instructions for mounting the throttle controller and regulator assembly to the compressor.
Guidance on locating and mounting the main control unit and the small electronic control unit.
Details on connecting the control unit to the vehicle's electrical system and compressor.
To Next Page
