Ordering Parts
To order parts, contact VMAC at:
Telephone 250-754-6997
Facsimile 250-754-6972
Office Hours 8:00 AM to 4:30 PM Pacific Time
Please quote the VMAC part number, the description and the quantity.
Warranty
The VMAC warranty form is located at the back of this manual. This warranty form must be
completed and mailed or faxed to VMAC at the time of installation for any subsequent warranty
claim to be considered valid.
The enclosed System Identification Number Plate must be attached to the vehicle at the time of
installation. This plate provides information, which allows VMAC to assist in customer inquiries and
ordering of parts. It is important that this plate is affixed to the vehicle.
Instructions
Locate the plate on the front body support on the passenger side of the in front of the hood stop
(Figure 1). Drill the two hole locations using a 7/64” drill bit. Place the plate in position and fix in
place with the two #6 pan head self tapping screws provided.
Figure 1
Changes and improvements
These products and documents are subject to changes or improvements without notice.
7
DOCUMENT 19295a
To Next Page
Loading...
